YD Type Bursting Disc
manufacturer: Shanghai MeiYan Yi Pump & Valve Co., Ltd.
Eml: sales@1bengfa.com
Tel: +86 (21) 5640 2009
Mob: +86 138 1691 3072（WeChat Same Account）
Introduction
Bursting disc is a complete arch shell, after instable flipping, it is cut for many pieces by buckling device knife to achieve pressure relief.
Characteristics
•Anti-fatigue, it can be used for a pulse pressure occasions.
•The highest working pressure can get to the 90% of the set burst pressure.
•It can withstand full vacuum state without bracket.
•Small fragment design can connect safety valve in series.
•Applicable to gas medium.
Technical parameter
| discharge diameter (mm) | bursting disc materials | |||||||||
| Ta | Ni | Monel alloy | Inconel Alloy | Austenitic stainless steel | ||||||
| min | max | min | max | min | max | min | max | min | max | |
| DN25 | 0.80 | 7.00 | 0.70 | 11.00 | 0.80 | 7.00 | 0.70 | 11.00 | 0.50 | 10.00 |
| DN38 | 0.60 | 7.00 | 0.60 | 10.00 | 0.60 | 7.00 | 0.60 | 10.00 | 0.40 | 9.00 |
| DN50 | 0.40 | 7.00 | 0.40 | 9.50 | 0.45 | 7.00 | 0.40 | 9.50 | 0.30 | 8.00 |
| DN80 | 0.35 | 6.00 | 0.35 | 9.00 | 0.35 | 6.00 | 0.35 | 9.00 | 0.25 | 7.00 |
| DN100 | 0.30 | 5.50 | 0.30 | 8.50 | 0.30 | 5.50 | 0.30 | 8.00 | 0.25 | 7.00 |
| DN150 | 0.25 | 5.00 | 0.30 | 7.50 | 0.25 | 5.00 | 0.25 | 7.00 | 0.20 | 6.00 |
| DN200 | 0.20 | 4.00 | 0.25 | 5.50 | 0.20 | 4.50 | 0.20 | 6.00 | 0.20 | 5.00 |
| DN250 | 0.20 | 3.50 | 0.20 | 5.00 | 0.20 | 4.00 | 0.20 | 5.00 | 0.20 | 4.00 |
| DN300 | 0.20 | 3.00 | 0.20 | 4.50 | 0.20 | 3.50 | 0.20 | 4.00 | 0.15 | 3.00 |
| DN350 | — | — | 0.20 | 4.50 | — | — | — | — | 0.15 | 2.00 |
| DN400 | — | — | 0.20 | 4.00 | — | — | — | — | 0.15 | 1.50 |
| DN500 | — | — | 0.20 | 4.00 | — | — | — | — | 0.15 | 1.00 |
The highest applicable temperature of various materials
Ta：250℃
Monel alloy：430℃
Austenitic stainless steel：480℃
Ni：400℃
Inconel Alloy：480℃
Haast alloy C-276： 480℃
The manufacture scope of Ta, Haast alloy C-276 are -5%，-10%, other materials are 0，-5%，-10%。
