I am designing an orifice plate to reduce the pressure in a system. I know how to use orifice plates to measure flow via differential pressure, but I do not know how to calculate the losses in head p

I am pieacing together a performance esxhaust system for my 1995 4cyl 2.2l toyota camry. im looking at about 125hp befor modifications,the car has a cold air intake and nology spark wires.

I start with sa-182 (sometimes 479) 304ss or 316ss bar. -drill and ream a 1/4" hole through. -insert precision ground rod into hole with 0.0000" to 0.0001" total clearance. requires moderate hammer hi

I have heard that a segment of piping in one of our plant was frozen with the hydrotest water in it. Although it is not related to my area of responsibility, I was thinking how I could calculate the

I want to attach a priming tank to an existing set of pumps. the pumps take suction from an underground tank with suction lines having foot valve, thus normally pumps remain primed.

I'm having a problem with a hydraulic teststand and have a suspicion that it might be because of a faulty servo valve.

I am young engineer and needs to know how to code equipment in a plant for maintenance and inventory purposes .

Is there any real case or study or paper where I can find a comparison between the reliability in classic hardwired I/O system(Junction box-marshalling-Controller) and field bus system.