Safety Valve Series

Product drawing»

Structural drawing»

You are here: News

News

the most common type of device 2011-07-25
In the 3.6% of patients undergoing the valve-in-valve procedure to fix a leak, the most common type of device malposition was deployment that was too low inside the left ventricular outflow tract (
Under the action of pressure of fluid 2011-07-21
Check Valves allow medium to flow in one direction only, stop medium which flow in opposite direction .usually these valve work automatically. Under the action of pressure of fluid which flow in one
may have a mixed structure of the material 2011-07-20
body, Conveyor Chain, may have a mixed structure of the material
If 2011-07-14
Y
hydraulic oil and engine coolant 2011-07-13
The machine employed a two-section, combination heat exchanger for both hydraulic oil and engine coolant (which was sized for the original, fixed-displacement pump) with a hydraulic fan drive. The fa
two-and three-piece ball 2011-07-12
1, the use of FEP lining of the ball, with a high chemical stability, can be applied in addition: "molten alkali metals and elemental fluorine", other than any strong corrosive properties; 2, the use
A partially open gate valve can cause vibrations 2011-07-11
A partially open gate valve can cause vibrations and permanent damage to pipes. The seating part of the valves can also be damaged by the fluid friction if the valves are partially opened. In these
what made it particularly difficult 2011-07-05
Bob Russell has just stitched up his own side by tabling an urgent Commons question to the Chancellor about the state of the spending review (fascinating that the Speaker allowed it; there have been q
Shanghai MeiYan Yi Pump & Valve Co., Ltd.
MeiYan Yi safety valve Contact MeiYan Yi
Shanghai Enine Pump & Valve Co., Ltd.
Enine safety valve Contact Enine
Shanghai Saitai Pump & Valve CO., Lid.
Saitai safety valve Contact Saitai
Shanghai Fengqi Industrial Development Co., Ltd.
FengQi safety valve Contact FengQi